Instruction Manual

4-3
IM MW100-01E
Troubleshooting and Maintenance
1
2
3
4
5
App
Index
Display Possible Problem Corrective Action
E040 Invalid client type. Enter a correct client type.
E041 Invalid server type. Enter a correct server type.
E050 Invalid input type. Enter an input type that can be selected for the module
specied by the channel number.
E051 Module of an invalid input type found in the Enter an input type that can be selected for all modules
range of specied channels.
specied by the channel range.
E052 Invalid measuring range.
Enter a measurement range that can be selected for the module
specied by the channel number.
E053 Module of an invalid measuring range found in Enter a measurement range that can be selected for all
the range of specied channels. modules specied by the channel range.
E054 Upper and lower limits of span cannot be equal.
Set a different value for the upper and lower limits of span.
E055 Upper and lower limits of scale cannot be equal. Set a different value for the upper and lower limits of scale.
E056 Invalid reference channel number. Set channels other than the input module’s own channel.
E060 Cannot set an alarm for a skipped channel. Set a type for the channel number setting other than SKIP.
E061 Cannot set an alarm for a channel on which Set the ON/OFF setting for expressions on the channel number
MATH function is turned OFF. to ON.
E062
Invalid alarm type. Enter an allowed alarm type.
E063 Invalid alarm relay number. Set a relay number for alarm output relays.
E065 Cannot set hysteresis for a channel on which Set the channel number alarm type to something other than
alarm are turned OFF. OFF
.
E070 Nonexistent channel specied in MATH Check whether a channel number outside of the allowable
expression. range was specied in the expression.
E071 Nonexistent constant specied in MATH
Check whether a MATH constant outside of the allowable
expression. range was specied in the expression.
E072 Invalid syntax found in MATH expression.
Check whether the syntax of the expression is correct.
E073 Too many operators for MATH expression. Reduce the number of operators.
E074 Invalid order of operators. Check whether the relationship between the operators used in
the expression satises proper syntax.
E075 Upper and lower limits of MATH span cannot be Set a dif
ferent value for the upper and lower limits of the MATH
equal. span.
E080 Incorrect MATH group format.
Check whether the MATH group format is correct.
E081 Incorrect channels for MATH group. Check whether there are any channels outside the allowable
range specied in the MATH group.
E082 Too many channels for MA
TH group. Reduce the number of channels specied in the MATH group.
E090 Incorrect break point format. Use the correct break point format.
E091 Time value of break point exceeds the setting Set a time within the allowable range.
range.
E092 Output value of break point exceeds the setting Set an output value within the allowable range.
range.
E093 No break point found. Set one or more break points.
E094 Invalid time value of rst break point. Set the time of break point 1 to zero.
E095 Invalid time sequence found in break points. Set the times of break points in ascending order.
E100 Invalid output type. Enter an output type that can be selected for the module
specied by the channel number.
E101 Module of an invalid output type found in the Enter an output type that can be selected for all modules
range of specied channels.
specied by the channel range.
E102 Invalid output range.
Enter an output range that can be selected for the module
specied by the channel number.
E103 Module of an invalid output range found in the Enter an output range that can be selected for all modules
range of specied channels. specied by the channel range.
E104 Upper and lower limits of output span cannot
Set a different value for the upper and lower limits of output
be equal. span.
E105 Invalid transmission reference channel.
Set the input module or MATH channel number.
E110 Invalid channel number for contact input event. Enter the channel number for DI input.
E111 Invalid channel number for alarm event. Set an input module or MATH channel number.
4.1 Error Display on the 7-Segment LED and Corrective Actions