User Manual

19
IM MW100-02E
Settings for Recording to CF Card
1.
From the browser top screen, click System Setting > Recording Setting.
The recording operation setting screen in displayed.
2. Click here, then select the save start operation.
3. Click here to select the type of recording.
4. Click to select the recording interval.
Set an integer multiple of the
measurement interval.
5. Select the data length.
6. Select a trigger length if data is to be
saved upon activation of the trigger.
Specify a pretrigger length as a
percentage of the data length.
7. Click to select the time remaining for activating
the media alarm.
8. Click here.
The settings are changed.
Recording Channel Settings
1.
From the browser top screen, click Channel Setting > Recording Channel Setting.
The recording channel setup screen appears.
2. Click here to select the recording
channel range.
3. Click here to select to record (On) or not
to record (Off).
4. Click here.
The settings are changed.
For information on thinning recording and Manual
Sample, see the MW100 Data Acquisition Unit
User’s Manual (IM MW100-01E). Thinning recording
(section 3.4), Manual Sample (section 1.3)
Entering Settings on the MW100 Using a Browser