User Manual

IM MW100-02E

Checking Free Space on the CF Card and Initializing

After choosing System Setting in step 5, click System Information.

The amount of free space on the CF card is shown under Media Information.

7. To initialize the CF card, click here, then click the Initialize

button.

Measurement Groups and Measurement Module Settings

From the browser top screen, click System Setting > Measurement Setting.

The measurement operation setting screen in displayed.

2. Click to select the measuring interval.

3. Click to select measurement groups of the

measurement intervals above for the input

modules.

4. Click here, then select the integral time from

the list.

If an output module is connected, or if a module

is not connected, it is not displayed.

5. Click here.

The settings are changed.

Note

• The Interval Group that is assigned to the measurement group number is set as:

(interval is short) Interval group1 ≤ Interval group2 ≤ Interval group 3 (interval is long)

• The equivalent of three modules worth of settings are entered for the 30-CH Medium Speed

DCV/TC/DI Input Module.

• Select the same measurement group for the three measurement groups.

• Select the same integral time for the three A/D integral times.

Entering Settings on the MW100 Using a Browser