Manual

Yokogawa Electric Corporation
User’s
Manual
MW100
Style Upgrade Guide
(Instructions for the Style Upgrade Kit)
1st Edition: October 2007 (YK)
All Rights Reserved, Copyright © 2007 Yokogawa Electric Corporation
IM 772050-02E
1st Edition
Foreword
Thank you for purchasing the MW100 style upgrade kit. This document describes the
use of the kit for upgrading the MW100 main module to the latest style.
CAUTION
• When the style upgrade is applied, IP addresses, range setting information, and
other parameters are all initialized, and the MW100 returns to its factory default
state. Saving the existing settings to the main unit CF card prior to upgrading will
allow easy reentry after upgrading.
• The IP address, subnet mask, default gateway, host name, domain name, date,
and time are not saved in the setup file. Take a note of the IP address, subnet
mask, default gateway, host name, and domain name.
• Upgrade both the firmware and Web software. Operation can become unstable
if only one is upgraded.
• This upgrade kit cannot be used for special versions of the MW100.
Contents of the Kit
The MW100 style upgrade kit includes the following. Check that no accessories are
missing or damaged.
CF card
*1
MW100 Viewer Software
Model: MW180-1
*2 Contains the MW100 Data Acquisition Unit
User’s Manual (IM MW100-01E) and
the MW100 Viewer Software User’s Manual
(IM MW180-01E).
*1 Includes the firmware
for the style upgrade.
Shows the latest
style number.
MW100 Manual CD-ROM
*2
Part number: B8724XA
MW100 Style Upgrade
Guide (this manual)
Model: IM 772050-02E
Upgrade seal
Part number: B8722AE
MW100 Operation Guide
Model: IM MW100-02E
MX100/MW100 Data Acquisition Unit
Installation and Connection Guide
Model: IM MX100-72E
STYLE
S
* 77205002E01*