Manual

32
IM 11M12A01-01E-A
Pressure Regulator, M1132KD
This general purpose regulator is used to adjust the pressure of the instrument air entering the air
eductor on the ZR22P.
Flow Capacity: 20 SCFM (33.6m/hr) at 100 psig supply – 20psig at outlet
Exhaust Capacity: 0.1 SCFM (0.17m/hr – downstream pressure 5 psig above setpoint
Sensitivity: 1” WC
Effect of Supply Pressure Variation: Less than 0.2 psig for 25 psi change
Maximum Supply Pressure: 250 psig
Air Consumption: Less than 6 SCFM
Output Range: 0 to 60 psi
Port size: ¼” NPT
Materials: Body – Die cast aluminum alloy
Diaphragm – Nitrile elastomer and nylon fabric
Trim – Brass, zinc plates steel, acetyl
Weight: 4.0 lbs (1.8 kg)
Pressure Gauge, M1132ME
Gauge Size: 2” (50mm)
Measuring Range: 0 to 60 psi
Connection: ¼” NPT