Instruction Manual

IM 11M12A01-03E
2-2
Repeatability: (Note1)
61 vol% H
2
O (sample gas pressure 2 kPa or less)
Linearity: (Excluding standard gas tolerance)
(Note1)
(Use oxygen of known concentration (in the measuring range) as the
zero and span calibration gas.)
62 vol% H
2
O; (Sample gas pressure: within 60.49 kPa)
63 vol% H
2
O; (Sample gas pressure: 2 kPa or less)
Drift: (Excluding the first two weeks in use)
(Note1)
both zero and span 63 vol% H
2
O/month
Response Time: Response of 90 % within 5 seconds. (Measured after gas is introduced
from calibration-gas inlet and analog output starts changing.)
(Note1) These tolerances do not apply to the pressure compensated
version, or where natural convection is used for the reference air.