Instruction Manual

IM 11M12A01-03E
10-12
10.2.1.5 Default Setting
When the analyzer is delivered, or if data are initialized, the blowback settings are by
default, as shown in Table 10.4.
Table 10.4 Blowback Default Setting
Item Default setting
Mode No function ("invalid")
Hold time 10 minutes, 00 seconds
Blow back time 10 minutes, 00 seconds
Interval 30 days, 00 hours
Start date 01/ 01/00
Start time 00:00
T10.4E.EPS