Instruction Manual

IM 11M12A01-03E
8-13
8. Detailed Data Setting
Output contact 1
r Output contact 2
r Output contact 3
r lnput contacts
Enter
Contact setup
F8.9E.EPS
Enter
Alarms
r Others
r During power-off the
contact is open and
in condition it is Open
Output contact 1
F8.10E.EPS
Figure 8.9 Contact Setup Display Figure 8.10 Output Contact 1 Display
Warm up: ON
r Range change:
OFF
r Calibration:
OFF
r Maintenance: ON
r Blow back:
OFF
r Temp.input high:
OFF
r Cal.gas press.low:
OFF
r Process up set:
OFF
Enter
Contact1 Others
F8.11E.EPS
Figure 8.11 “Contact1 — Others” Display