Owner manual
IMPORTANT
T0401.EPS
Symbol Parameter Description and Settings
V (ST) Slot-Time
Set 4 or greater value.
V (MID)
Minimum-Inter-PDU-
Delay
Set 4 or greater value.
V (MRD)
Maximum-Response-
Delay
Set so that V (MRD) 3 V
(ST) is 12 or greater
V (FUN) First-Unpolled-Node
Indicate the address next
to the address range used
by the host. Set 0x15 or
greater.
V (NUN)
Number-of-
consecutive-
Unpolled-Nodes
Unused address range.
Rotamass addess is
factory set to 0xF6. Set
this address to be within
the range of BASIC device
in Figure 4.2.
Bridge device
Not used
0x10
0x00
0x0F
0x14
0x13
0xF7
0xF8
0xFB
0xFC
0xFF
V(FUN)
V(FUN)+V(NUN)
Rotamass (0xF6)
LM device
Unused V(NUN)
Note 1: LM device: with bus control function (Link Master function)
Note 2: BASIC device: without bus control function
BASIC device
Default address
Portable device address
F0403.EPS