Instruction Manual

ManualsBrandsYokogawa ManualsSensorsRotaMASS 3-Series



5-1

IM 01R04B04-00E-E 8th edition March 01, 2011 -00



Data setting can be done by HART-Communication (see chapter 6) or with the 3 keys on the front panel.

The following section describes how to use the three panel keys.

Operate the display unit under the condition where direct sunlight, etc.... do not shine to the setting

switches directly when the parameter setting operation is carried out.

(1) Always use the setting switches with the cover of the ROTAMASS closed.

(2) Use these switches when covered by the glass window.

(3) If dirt, dust or other substances surfaces on the display panel glass, wipe them clean with a soft dry cloth.

(4) The operation with dirty gloves may cause a switch response error.



Construction of ROTAMASS display :

LCD dot matrix (32 x 132 dots)

• 1 line indication or

• 2 line indication or

• 3 line indication or

• 4 line indication

3 infrared switches

SET

SHIFT

SET

: conrm data setting

or entry data setting

or conrm parameter

SHIFT

: move cursor right to

next position

SET

SHIFT

: return to higher menu level

: move to lower

parameter

or increment value

SHIFT

+ : move to upper

parameter

F51.EPS

SET SHIFT

ESC

General display indication :

123.450

kg/h

MFR

Indication of title

Indication of numeric value

Indication of unit

F52.EPS

Lock symbol for indication of hardware write protect

IMPORTANT

NOTE