Instruction Manual
9-24
All Rights Reserved. Copyright © 2003, Rota Yokogawa
IM 01R04B04-00E-E 8th edition March 01, 2011 -00
If the cover of the converter RCCF31 / RCCT3 has to be opened, following instructions must be followed.
CAUTION
1. Conrm that the power cables to the instrument are disconnected.
2. Wait 15 minutes after power is turned off before opening the covers.
3. The covers of display side and terminal box are xed with special screws, please use Hexagonal
wrench to open the covers.
4. Be sure to lock the cover with special screw using the Hexagonal Wrench after
tightening the cover (see drawing chapter 4.3).
5. Before starting the operation again, be sure to lock the cover with the locking screws.
6. Prohibition of specication changes and modications. Users are prohibited from making any modications
of specications or physical conguration, such as adding or changing the conguration of external wiring
ports.
WARNING
The instrument modication of parts replacement by other than authorized representatives
of YOKOGAWA
is prohibited and will void the certication.