User guide

8-5
IM 04L41B01-01E
Using the Security Function
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
• User basic settings > Operation without login
Sets the operation that the user can carry out when logged out.
Settings Description
Off Only login operation is available.
Display Allows the user to switch the operation screen in addition to the login operation.
• Admin number
Up to ve administrators can be registered. Be sure to register at least one
administrator. At least one administrator must be registered to use the login function.
• Admin settings > Mode
The available settings vary depending on the Security setting.
Settings Description
Off Not register.
Key Log into the DX using keys.
Comm Log into the DX via communications.
Web Log into the operator page and monitor page of the DX using a Web browser.
Key+Comm Log into the DX using keys and via communications.
• Admin settings > User name
Set the user name. (Up to 20 characters,
A a # 1
)
• You cannot register user names that are already registered.
• You cannot register “quit” or a user name containing all spaces.
• Admin settings > Password
Set the password. (Release numbers 3 and later: up to 8 characters. Release
numbers 4 and later: up to 20 characters.
A a # 1
)
Unregistered password is displayed as “????????.” An entered password is displayed
as “********.”
• You cannot register “quit” or a password containing all spaces.
• User number
Up to 30 users can be registered.
• User settings > Mode
The available settings vary depending on the Security setting.
Settings Description
Off Not register.
Key Log into the DX using keys.
Comm Log into the DX via communications.
Web Log into the monitor page of the DX using a Web browser.
Key+Comm Log into the DX using keys and via communications.
• User settings > User name, Password
See the explanation for the administrator user name and password.
• Authority of user
Settings Description
Off No limitations on the operation.
1 to 10 Registration number of the operation limitation.
• Authority of user > Key action, Media/USB, Action of Function
Select the “authority of user” preset number from 1 to 10.
See section 8.1.
8.2 Enabling Only Registered Users to Operate the DX (Login Function)