User guide

7-4
IM 04L41B01-01E
• Timer
Timer used by event action. Used also in the TLOG computation of the computation
function.
* The timer cannot be changed while memory sampling or computation is in progress.
• Timer No.
Up to four timers (1 to 4) can be set.
When Using an Absolute Timer
• Mode
Select Absolute.
• Interval
Select the interval from the available settings between 1min to 24h.
• Ref.time
Set the time in the range of hour 0 to hour 23.
When Using a Relative Timer
• Mode
Select Relative.
• Interval
Set the interval in the range of 00:01 (1 min) to 24:00 (24 hours).
• Reset at Math Start
On: Resets the timer when computation is started. The resetting of the timer is not
considered to be a timeout. Even if the timer is used as an event, the action is not
executed.
• Match Time Timer
Set the time match condition used in event action.
* The condition cannot be changed while memory sampling or computation is in progress.
• Timer number
You can set up to four match time conditions (1 to 4).
7.1 Setting the Event Action Function (Including the remote control function of the /R1 and /PM1 options and
the USER key)