User guide

4-6
IM 04L41B01-01E
Explanation
• ALL CHANNEL/GROUP CHANNEL on the Trend Display
On the group display, the channels that are assigned to the group are displayed. In
all channel display, the waveforms of all channels that are congured to record data
are displayed on the current group display. The waveforms of channels that are not
assigned to the group are displayed in the waveform display area, but the scales,
current value marks, and digital values of the channels are not displayed.
• SCALE ON/OFF and DIGITAL ON/OFF on the Trend Display
Select whether to show or hide the scale and numeric display sections.
• AUTO SCROLL ON/OFF
The displayed groups can be automatically switched at a specied interval by
selecting AUTO SCROLL ON. The display switches in ascending group order.
For the procedure to set the auto scroll interval of groups, see section 5.13.
• MESSAGE DISP 1 and MESSAGE DISP 2 on the Trend Display
Switches the message display method.
• AUTO ZONE (Release number 3 or later)
Displays trend waveforms separately by evenly dividing display areas (zones) among
a group’s channels.
With AUTO ZONE OFF
With AUTO ZONE ON
Waveform display area is
divided evenly.
• FINE GRID (Release number 3 or later)
Display the ne grid when the normal grid is too wide for reading measured values.
The ne grid can be used in the trend and historical trend displays. The ne grid
places an additional four lines between the normal grid lines.
With FINE GRID OFF
With FINE GRID ON
Fine grid
4.2 Displaying the Measured Data as Waveforms, Values, or Bar Graphs