Manual

10
IM 04L41B01-19E
Specification of Data
If you install the GSD file, the DX is added to the configuration tool as a "General" type
"Slave".Select[Model]toexpandthemodulelistandselectyourDXmodelfromthelist.
Item Explanation
Model Them
odelnamedescribedintheGSDfile.Selectthedeviceto
beconfiguredfromthemodelnameofthe"General"typeand
the"Slave"inthedevicestreeorlistbox.
DataAcquisitionPROFIBUSI/F
Module The DX models are referred to as modules. Selecting the
model"Data
AcquisitionPROFIBUSI/F"allowsyoutoselecta
module.
DX1002 DX1002, DX1002N, without Option/M1 and /PM1
DX1002/M1 DX1002, DX1002N, with Option/M1 or /PM1
DX1004 DX1004, DX1004N, without Option/M1 and /PM1
DX1004/M1 DX1004, DX1004N, with Option/M1 or /PM1
DX1006 DX1006,DX1006N,
withoutOption/M1and/PM1
DX1006/M1 DX1006,DX1006N,
withOption/M1or/PM1
DX1012 DX1012, DX1012N, without Option/M1 and /PM1
DX1012/M1 DX1012, DX1012N, with Option/M1 or /PM1
DX2004 DX2004, without Option/M1 and /PM
1
DX2004/M1 DX2004, with Option/M1 or /PM1
DX2008 DX2008,without
Option/M1and/PM1
DX2008/M1 DX2008,with
Option/M1or/PM1
DX2010 DX2010, without Option/M1 and /PM1
DX2010/M1 DX2010, with Option/M1 or /PM1
DX2020 DX2020, without Option/M1 and /PM
1
DX2020/M1 DX2020, with Option/M1 or /PM1
DX2030 DX2030,without
Option/M1and/PM1
DX2030/M1 DX2030,with
Option/M1or/PM1
DX2040 DX2040, without Option/M1 and /PM
1
DX2040/M1 DX2040, with Option/M1 or /PM1
DX2048 DX2048,without
Option/M1and/PM1
DX2048/M1 DX2048,with
Option/M1or/PM1
Communication Connection
You can establish a communication connection by using the configuraton tool and run
it with a PLC. For information on using the configuration tool and a PLC, see the user's
manuals of these products.
Preparation for PLC