User guide

2-56
IM 04L41B01-04E
2.30 Attributes of Comment Block Components
These components are used to display a comment block. You can display the string by
specifying the comment block number configured for the DX main unit.
Component type
(See Section 1.4.)
Comment display Overlap restriction
(See Section 1.4.)
None Update
cycle
None
Name of Each Component
Strings
Background color
Attribute Setting Dialog
List of Attributes
Attribute Description Default value
ID Number automatically assigned for component
identification.
0 to 79
Comment block
no
Sets the comment block number.
1 to 50 for DX1000 and 1 to 100 for DX2000
1
Font Sets the character size.
Selectable from [Font 5], [Font 6], [Font 8], [Font 12],
and [Font 16].
Font 6(DX1000)
Font 8(DX2000)
Gap Sets the character gap of the string. Selectable in the
range of 0 to 15.
0
Arrangement Sets the horizontal arrangement of the string.
Selectable from [Center], [Left], and [Right].
Left
Color Set the color of the string.
Selectable from among [Red], [Green], [Blue], [B.violet],
[Brown],[Orange],
[Y.green],[Lightblue],[Violet],
[Gray], [Lime], [Cyan], [Darkblue], [Yellow], [Lightgray],
[Purple],[Pink],[L.brown],[L.green],[Darkgray],[Olive],
[Darkcyan],[S.green],[Black],[White],and[BASE].
Black
Continued on the next page