Owner manual

1-68
IM 04L41B01-17E
Settings on the DX1000 Server (Modbus Server)
Setting the Modbus Server Function
◊ Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the Menu tab > Communication (Ethernet) > Server >
Server modes.
Item Settings
Modbus Use
About the Port Number
The port number is 502 by default.
Setting the Measurement Channel
◊ Press MENU (to switch to setting mode), and select the Menu tab > Meas channel >
Range, Alarm.
Item Settings
First-CH, Last-CH 1
Mode Volt
Range 2V
Span_L –2.0000
Span_U 2.0000
1.11 Usage Example of the Modbus Function