Owner manual

1-29
IM 04L41B01-17E
Using the Ethernet Interface
1
2
3
4
5
6
App
Index
Page Type
• Monitor
Configure the monitor page. You can carry out the following operations on the monitor
page.
• Display the alarm summary
• Display the measured and computed values of all channels
•
Display logs (message summary, error log, etc.)
• Print the DX screen with an attached title and comment
• Display reports
• Connect to the DX via FTP and retrieve files
• Make an alarm sound when an alarm occurs on the DX.
For screen examples, see “Monitoring with the Browser” in this section.
• Operator
Set the operator page. The following operations can be carrie
d out in addition to the
functions available on the monitor page.
• Switch the operation screen
• Control the DX’
s DISP/ENTER key, arrow keys, and favorite key
• Write messages (this operation cannot be performed on DXs with the /AS1
advanced security option).
• Search data by date and time
For screen examples, see “Monitoring with the Browser” in this section.
Setting the monitor page
• Page type
Select Monitor.
• Setting On/Off
T
o display the monitor page on a browser, select
On; otherwise, select Off.
• Access control
To use access control, select
On
.
On DXs without the /AS1 advanced security option:
If you set this to On, you must enter a user name and password to display the monitor
page. Set the user name and password through the Login item. For details, see the
DX1000/DX1000N or DX2000 User’s Manual (IM04L41B01-01E or IM04L42B01-01E).
On DXs with the /AS1 advanced security option:
If you set this to On, you must enter a user name and password to display the monitor
page. Set the user name and password through the Login item. See the Advanced
Security Function (/AS1) User’s Manual (IM04L41B01-05EN).
Setting the operator page
• Page type
Select Operator.
• On/Off
T
o display the operator page in the browser, select
On. Otherwise, select Off.
• Access control
This is the same as the setting on the monitor page.
• Command input
On DXs without the /AS1 advanced security option:
T
o use message write commands, select
On. Otherwise, select Off.
On DXs with the /AS1 advanced security option:
You cannot use message write commands. This setting is fixed at
Off
.
1.5 Monitoring the DX on a PC Browser