Owner manual

3-45
Commands
IM 04L41B01-17E
1
2
3
4
5
6
App
Index
p5
Reconfirmation of the new password to
use if the current one has expired (up to 20
characters)
This parameter is meaningless if the
current password has not yet expired. This
parameter can be omitted.
Example
Log in as user a (whose user ID is “aaaa” and
whose password is “aaaaaa”), start computation,
and execute memory start.
LLa,aaaa,
aaaaaa;TL0;PS0
Description
• This command can be used if the login
function has been enabled (by an
administrator).
• After the LL command, use sub delimiters to
make a list of commands to execute.
• You log into the DX when you execute this
command, and you are automatically logged
out after the command is executed.
• The LL command communication responses,
including those for errors, are the same as
those for other commands.
3.6 Basic Setting Commands
WU Sets the environment
Settings
GENERAL, BATCH, DISPLAY, MESSAGE,
INPUT, ALARM, SECURITY, MEDIA, MATH,
REPORT, SERVICEPORT, DECIMALPOINT,
POP3, ALARM_LEVEL, ALARM_ COLOR,
TAG, MENU, REMOTE, and FTPSERVER
General environment settings
Syntax
WU p1,p2,p3,p4<terminator>
p1
Setting type (GENERAL)
p2
Selects tag or channel number
TAG
T
ag
CHANNEL
Channel number
p3
Language
ENGLISH
JAPANESE
CHINESE
GERMAN
FRENCH
p4
Remote control ID (OFF, 0 to 31)
Batch settings
Syntax
WU p1,p2,p3,p4,p5<terminator>
p1
Setting type (BA
TCH)
p2
Batch function (OFF, ON, MUL
TIBA
TCH)
OFF Disables the batch function
ON Enables the batch function
MULTIBATCH
Enables the multi batch
function
p3
Number of lot number digits (OFF
, 4, 6, 8)
p4
Auto increment (ON, OFF)
p5
Number of batch groups (DX1000: 2 to 6.
DX2000: 2 to 12)
Description
•
P
arameters p3 and p4 are valid when p2 is set
to ON.
• Parameters p3, p4, and p5 are valid when p2
is set to MULTIBATCH.
Display settings
Syntax
WU p1,p2,p3,p4<terminator>
p1
Setting type (DISPLA
Y)
p2
Trend type
T-Y
T
-Y
display
CIRCULAR
Circular display
p3
Partial expansion(OFF, ON)
p4
Trend interval switching (OFF, ON)
Description • Parameters p3 and p4 are valid when p2 is set
to T-Y.
• When multi batch is in use, p4 is fixed at OFF.
Message settings
Syntax
WU p1,p2,p3,p4<terminator>
p1
Setting type (MESSAGE)
3.5 Control Commands / 3.6 Basic Setting Commands