Owner manual

3-4
IM 04L41B01-17E
3.2 A List of Commands
When the /AS1 Advanced Security Option Is Not in Use
DX Execution Modes
There are two execution modes on the DX. If you attempt to execute a command in a
mode that is different from the specification, a syntax error occurs. Use the DS command
to switch to the appropriate execution mode, and then execute the command. Query
commands can be executed in either mode.
•
Basic setting mode
Measurement and computation are stopped, and settings are changed in this mode.
•
Operation mode
As a general rule, commands other than those for the basic setting mode described
above are used in this mode.
Administrator and User
The administrator and user specifications in the table indicate the user level that is
specified using the login function for Ethernet communications.
“Yes” and “No” in the table indicate the following:
Y
es: Command usable
No:
Command not usable
Setting Commands
Note
If the multi batch function (/BT2 option) is enabled, you cannot use the SR, SO, SK, TJ, SW,
TE, SJ, ER,TQ, and TK commands unless all batch recording operations are stopped.
Group Command Function Execution Administrator User Page
Name Mode
SR
Sets an input range Operation mode Y
es No 3-19
SO
Sets a computing equation Operation mode Y
es No 3-20
ER
Sets the range of an external input channel
Operation mode Yes
No 3-20
TJ
Sets memory sampling
Operation mode Yes
No 3-21
SA
Sets an alarm Operation mode Y
es No 3-21
SW
Sets the trend interval and auto save interval
Operation mode Y
es No 3-22
TI
Sets the circular display of
fset time Operation mode
Yes No 3-22
TO
Sets how the DX operates after one circular display cycle Operation mode Yes No 3-23
TW
Sets the secondary trend interval Operation mode Y
es No 3-23
TM
Sets manual sampling
Operation mode Yes
No 3-23
TE
Sets sampling conditions for event data
Operation mode Y
es No 3-23
SZ
Sets a zone
Operation mode Y
es No 3-23
SP
Sets a partial expanded display
Operation mode Y
es No 3-24
ST
Sets a tag
Operation mode Y
es No 3-24
SX
Sets a display group (release number 2 or earlier)
Operation mode Yes No 3-24
SL
Sets a trip line (release number 2 or earlier) Operation mode Yes
No 3-24
NX
Sets a display group (release number 3 or later) Operation mode Y
es No 3-25
NL
Sets a trip line (release number 3 or later)
Operation mode Y
es No 3-25
SG
Sets a message
Operation mode Y
es No 3-25
TH
Sets the directory on the external storage medium for
Operation mode Y
es No 3-25
saving data
TZ
Sets a file header Operation mode Y
es No 3-26
TF
Sets a data file name
Operation mode Y
es No 3-26
SD
Sets the date and time
Operation mode Y
es No 3-26
TD
Sets daylight saving time Operation mode Yes
No 3-26
TT
Sets the trend display Operation mode Y
es No 3-26
SE
Sets the line width and the number of grids to use
Operation mode Y
es No 3-27
on the trend graph
TB
Sets the bar graph display Operation mode Y
es No 3-27
SB
Sets the bar graph for a channel
Operation mode Y
es No 3-27