Owner manual

2-16
IM 04L41B01-17E
Settings on the DX1000 Slave (Modbus Slave)
Setting the Modbus Slave Function
◊ Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the Menu tab > Communication (Serial) > Basic settings.
Item Settings
Address 1
Protocol Modbus
Setting the Measurement Channel
◊ Press MENU (to switch to setting mode), and select the Menu tab > Meas channel >
Range, Alarm.
Item Settings
First-CH, Last-CH 1
Mode Volt
Range 2V
Span_L –2.0000
Span_U 2.0000
2.7 Usage Example of the Modbus Function