Manual
IM 04L41B01-05EN
App-2
Operation Display Detailed
Information
Additional
Information*
Event edge switch EEdgSw Switch number -
Shift to setting mode MoveEng - -
Shift to basic setting mode MoveSys - -
Shift to operation mode MoveOpe - -
Writing of a value from the custom display to a communication
input channel
WrCommuCH Communication
input channel/set
value
-
Writing of a value from the custom display through the use of a
Modbus client
ExchgModC Command number/
set value
-
Writing of a value from the custom display through the use of a
Modbus master
ExchgModM Command number/
set value
-
Saving of settings in setting mode EngSave - -
Loading of settings in setting mode EngLoad - -
Loading of setting in basic setting mode SysLoad - -
Clear 1 Clear1 - -
Clear 2 Clear2 - -
Clear 3 Clear3 - -
Clear 4 Clear4 - -
Finishing of calibration correction CCSetEnd - -
Passing of the calibration due date without calibration having been
completed
CCExpire - -
Collective setting changes
Changing of setting mode settings EngSet Setup file sequence
number
-
Changing of basic setting mode settings SysSet Setup file sequence
number
-
Changing of settings related to user registration LoginSet Setup file sequence
number
-
Changing of setting mode settings and basic setting mode settings Eng&SysSet Setup file sequence
number
-
Changing of setting mode settings and settings related to user
registration
Log&EngSet Setup file sequence
number
-
Changing of basic setting mode settings and settings related to
user registration
Log&SysSet Setup file sequence
number
-
Changing of setting mode settings, basic setting mode settings,
and user registration settings
AllSet Setup file sequence
number
-
Individual setting changes
Alarm setting AlarmSet Channel/level SA command
Changing of a calibration point CCPointSet Channel number EH command
Changing of a calibration value CCValueSet Channel number/
calibration point
EH command
Alarm delay time change AlmDlaySet Channel number BD command
Message setting MessageSet Message number SG command
Data save destination folder setting FolderSet - TH command
* The contents of the setting change are displayed in communication command format.
Appendix 1 Operation Log Contents