Manual

3-2
IM 04L41B01-05EN
3.2 Using the Password Management Function
Logging In and Out
Logging In
Log in by entering the user name and password.
1.
Press FUNC.
A window for entering the user name appears.
2.
Select or enter a user name, and press DISP/ENTER.
On the left is the DX1000 screen. On the right is the DX2000 screen.
3.
Enter the password, and press DISP/ENTER.
The window closes, and you are logged in.
Note
Even if you enter a password, you may not be able to log in because of a network error or
a problem with the settings. An error message will appear if this is the case. Perform the
operation described below to log in as the root user.
1. Enter "root" for the user name, and press DISP/ENTER without entering a password.
An error message will appear, followed by a window for entering the password again.
2. Enter the root password, and press DISP/ENTER.
You can log in as the root user. The initial root user password is root123.
Logging Out
For operating instructions, see section 2.2.