Manual

Password Management
3-1
IM 04L41B01-05EN
1
2
3
Index
App
3.1 Configuring the Password Management
Function
The following settings are necessary:
For a description of the function, see section 1.4
● Security>Passwordmanagement
Enables the password management function.
See section 2.1.
● Login
Specify operation modes, user names, and restrictions for each normal user.
See section 2.1
● Rootpassword>Password
Set the password of the root user.
See section 2.1
● Communication(Ethernet)>Passwordmanagement>KDCconnection,
Certification key
Set the server information, the encryption method, etc.You can select the encryption
method from AES128, AES256, and ARC4.
These menu items only appear when the password management function is enabled.
For the setting procedure, see section 1.14 in the
Communication Manual.
Note
ARC4 (ARCFOUR) is an encryption algorithm that is compatible with RC4.
● Communication(Ethernet)>SNTP client
For the password management function to work, the times on the KDC server and
the DX must be synchronized. Congure the DX to always synchronize itself with an
SNTP server on the network.
For the setting procedure, see section 1.8 in the Communication Manual.
Note
The password management function will not work if there is a difference of ±5 minutes or more
between the DX and the KDC server.
Chapter 3 Password Management