User Manual

2-33
IM 04P01B01-61E
Configuring the Recorderr
1
2
3
4
Index
A/D Integrate, Temperature, Batch, Aux, and Math Exception
Click here (or choose [Setting] > [SET [Basic] Setting]
> [A/D Integrate]/[Temperature]/[Batch]/[Aux]/[Math Exception])
Displayed on models with the computation
function (/M1 option).
On the pen model, [Filter] is displayed.
A/D Integrate (Integration Time of the A/D Converter)
50 Hz: Sets the time to 20 ms.
60 Hz: Sets the time to 16.7 ms.
Auto: Set to the integration time synchronized to the power supply
frequency (20 ms or 16.7 ms).
100 ms (dot model): Sets the integration time to 100 ms.
The scan interval is set to 2.5 s.
Temperature
Sets the unit of temperature measurements using thermocouples and RTDs.
C: Celsius
F: Fahrenheit
Batch (/BT1 Option)*
* Function available on recorders with firmware version 1.31 or later.
• Batch
Use: Enables start printout, end printout, and batch name.
• Digit of lot number
Sets the number of digits of the lot number.
• Dual Comment
Use: Enables start printout 2 and end printout 2.
Aux
• Moving Ave (Dot Model)
Select Use to enable the setting of the sampling count of the moving average for the
measurement channels.
• Filter (Pen Model)
Select Use to enable the setting of the lter constant for the measurement channels.
• Partial
Select Use to enable the setting of the boundary position and boundary value of the
partial expanded recording function for measurement channels and computation
channels.
2.7 Setting the Items in Basic Setting Mode