User Manual
2-6
IM 04P01B01-61E
• Options
Math Func.: Computation function (/M1 option)
Communication RS-422/485: RS-422/485 Communication Interface (/C3)
Communication Ethernet: Ethernet Communication Interface (/C7)
Alarm Relay 2p: Alarm output relay 2 points (/A1)
Alarm Relay 4p: Alarm output relay 4 points (/A2)
Alarm Relay 6p: Alarm output relay 6 points (/A3)
Alarm Relay 12p: Alarm output relay 6 points (/A4, µR20000)
Alarm Relay 24p: Alarm output relay 6 points (/A5, µR20000)
With FAIL/Chart End: FAIL/Chart End Detection and Output (/F1)
Remote: Remote Control Input (/R1)
Cu10, Cu25 Inputs: Cu10, Cu25 RTD Input (/N1)
Expansion Inputs: Expansion Inputs (/N3)
Calibration:* Calibration Correction (/CC1)
Header Printout:** Header Printout (/BT1)
* Function available on recorders with firmware version 1.21 or later.
** Function available on recorders with firmware version 1.31 or later.
Checking/Changing the System Configuration of the Setup Data
• Checking the System Configuration
With the setup data displayed in the window, choose System Conguration from the
System menu.
The System Conguration dialog box opens.
Check the system conguration that is shown, and click OK.
The dialog box closes.
• Changing the System Configuration
With the setup data displayed in the window, choose System Conguration from the
System menu.
The System Conguration dialog box opens.
Change the system conguration, and click OK.
The conrmation dialog box opens. Click OK to open a setup window with the
specied system conguration with the settings set to default values.
Initializing the Settings
1.
From the Setting menu, choose Initialize.
The Initialize dialog box opens.
2.
Click OK to initialize the settings.
Note
For the default settings, see section 4.3, “Menu Structure, Settings, and List of Default
Values” in the µR10000 Recorder User’s Manual (IM 04P01B01-01E) or µR20000 Recorder
User’s Manual (IM 04P02B01-01E).
2.3 Loading the Setup Data or Creating New Setup Data