User Manual

IM 04P01B01-01E
4-4
4.2 Key Operations
Entering Characters
Use the key or SHIFT + key to move the cursor.
SHIFT key + key
key
Cursor
Unit=ppm
CHR:a-z
Use the CHARACTER key or SHIFT + CHARACTER key to select the character type.
Use the
key or SHIFT + key to select a character. You repeat these steps to set
the character string.
Character type
Unit=ppm
CHR:a-z
The character types change in the following order: uppercase alphabet (A-Z), lowercase
alphabet (a-z), numbers (0-9), and symbols (%-.).
A-Z A to Z, and space
a-z a to z, and space
0-9 0 to 9, and space
%-. %, #, °, @, +, –, *, /, (, ), μ, Ω,
2
,
3
, ., and space
SHIFT key + key
key
Unit=ppm
CHR:a-z
p
o
n
l
k
j
When you press the key, the change is applied and the next screen is displayed.
Inserting Characters
Press the key or SHIFT + key to move the cursor to the position where the
character is to be inserted.
Press the CHARACTER key or SHIFT + CHARACTER key to show Ins
DISP
and then
press the
key. A space for one character is inserted. Enter the character.
Position to insert the character
Display Ins DISP
Unit=ppm
CHR:Ins DISP
Deleting a Character
Use the key or SHIFT + key to move the cursor to the character to be deleted.
Press the CHARACTER key or SHIFT + CHARACTER key to show Del DISP
and then
press the
key. The character is deleted.
Deleting an Entire Character String
Press the CHARACTER key or SHIFT + CHARACTER key to show Clear DISP and
then press the
key. The entire character string is deleted.
Copying & Pasting a Character String
Show the copy source character string.
Press the CHARACTER key or SHIFT + CHARACTER key to show Copy DISP
and
then press the
key. The character string is saved to the memory.
Show the copy destination.
Press the CHARACTER key or SHIFT + CHARACTER key to show Paste
DISP
and
then press the
key. The character string is pasted.