User Manual

IM 04P01B01-01E
9-22
9.12 Setting the Timer Used in TLOG Computation and Periodic Printout
Reset
Selects whether to reset the TLOG computed value at each interval. The figure below
illustrates the reset operation for sum computation (TLOG.SUM).
Example: TLOG.SUM computation
1 2 3
ResetReset Reset
Reset: On
Timer timeout
Reset: Off
When reset is ON, the sum value is calculated over each interval. When set to Off, the
sum value from computation start is calculated.
Print
On: Prints the computed value every interval specified by the timer. Computation
channels set to Off do not apply.
Off: Does not print.