User Manual

7-33

IM 04P01B01-01E

Setup Operations for Changing/Adding Functions (Basic Setting Mode)

App

Index

7.21 Selecting to Show/Hide Setting Mode Menus

Select the menu for showing/hiding the Setting mode menus. This function is available

on version 1.31 or later.

Basic Setting mode cannot be entered when recording is in progress or when

computation is in progress on models with the computation function (/M1 option).

Procedure

Changing the Settings

Hold down the

key for 3 seconds to enter Setting mode.

Hold down the and keys simultaneously for 3 seconds to enter Basic

Setting mode.

Press the key or SHIFT + key to select Select menu and then press the

key.

Press the key with Set mode shown on the screen.

Set each item and press the key.

Use the

key or SHIFT + key to select values.

For the procedure on how to enter values or characters, see section 4.2.

If you press the ESC key in the middle of the operation, the settings entered up to

then are cancelled, and the display returns to a higher level menu.

When the Setting complete screen appears, do either of the following:

To correct the setting the

key.

If you are done, press the ESC key.

Basic=Select menu

Range=On

Select whether to display Range in