User Manual

4-5
IM 04P01B01-17E
Commands
1
2
3
4
5
6
App
Index
Control Commands
Key Command
Name
Function Execution Mode Administrator User Page
-
DS
Switches the execution mode. All modes Yes No 4-28
RCD
PS
Starts/Stops recording. Run mode Yes No 4-28
DISP
UD
Switches the screen/switches the channel. Run mode Yes No 4-28
FUNC
AK
Executes alarm acknowledge (AlarmACK) Run mode Yes No 4-28
FUNC
TL
Starts/stops/resets computation (/M1 option). Run mode Yes No 4-28
FUNC
MP
Starts/Stops manual print. Run mode Yes No 4-28
FUNC
LS
Starts/Stops the list (setting information) printout. Run mode Yes No 4-28
FUNC
SU
Starts/Stops the setup list (basic setting information)
printout.
Run mode Yes No 4-28
FUNC
MS
Executes the message printout. Run mode Yes No 4-28
FUNC
AC
Clears the alarm printout buffer. Run mode Yes No 4-28
FUNC
MC
Clears the message printout buffer. Run mode Yes No 4-29
FUNC
VG
Resets the report data of the periodic printout. Run mode Yes No 4-29
-
YC
Initializes the settings. Basic Setting mode Yes No 4-29
-
UY
Stops the record position adjustment. Basic Setting mode Yes No 4-29
Yes: Command usable
No: Command not usable
Output Commands
Command
Type
Command
Name
Function Execution Mode Administrator User Page
Control
BO
Sets the byte output order. All modes Yes Yes 4-29
CS
Sets the check sum
(usable only during serial communications).
All modes Yes Yes 4-29
IF
Sets the status filter All modes Yes Yes 4-29
CC
Disconnects an Ethernet connection
(usable only during Ethernet communications)
All modes Yes Yes 4-30
Setup, measurement, and computation data output
FE
Outputs decimal point position, unit information,
and setup data.
All modes Yes Yes 4-30
FD
Outputs the most recent measured/computed data. Run mode Yes Yes 4-30
FY
Outputs the statistical computation results. Run mode Yes Yes 4-30
FF
Outputs FIFO data. Run mode Yes Yes 4-30
IS
Outputs status information. All modes Yes Yes 4-31
FU
Outputs user information. All modes Yes Yes 4-31
Yes: Command usable
No: Command not usable
RS-422A/485 Dedicated Commands
Command Name Function Execution Mode Administrator User Page
Esc O
Opens the instrument. All modes Yes Yes 4-31
Esc C
Closes the instrument. All modes Yes Yes 4-31
Yes: Command usable
No: Command not usable
4.2 A List of Commands