User Manual

3-15

IM 04P01B01-17E

Using the RS-422A/485 Communication Interface (/C3 Option)

App

Index

Explanation

• Address

Select the address from the following range.

01 to 32

• Baud rate

Select the baud rate from the following:

1200, 2400, 4800, 9600, 19200, or 38400

• Data length

Select the data length from below. To output data in BINARY format, be sure to set the

data length to 8 bits.

7 or 8

• Parity (Parity check method)

Select the parity check from the following:

Odd, Even, or None

• Protocol

Select the protocol when using the Modbus slave protocol.

NORMAL: Standard protocol

MODBUS: Modbus slave protocol

• Saving the Settings

To activate the settings made in the Basic Setting mode, the settings must be saved.

3.5 Setting the Serial Interface