User Manual

2-10
IM 04P01B01-17E
Note
• The relationship between the login function and the user name that is used when accessing
the recorder is as follows:
• When the login function is set to “Use”
• The registered user name and password can be used to login to the recorder.
• The user level is the level that was specified when the user name was registered.
• When the login function is set to “Not”
• The user name “admin” can be used to login to the recorder as an administrator.
Password is not necessary.
• The user name “user” can be used to access the recorder as a user. Password is not
necessary.
• There are limitations on the number of simultaneous connections or simultaneous uses of
the recorder from the PC (see section 2.1).
• For a description of the login process of the Setting/Measurement server and Maintenance/
Test server, see appendix 3.
• Saving the Settings
To activate the settings made in the Basic Setting mode, the settings must be saved.
2.5 Registering Users