User Manual

2-2

IM 04P01B01-17E

2.2 Connecting the Ethernet Interface

When Connecting Only the Recorder and a PC

Connect the recorder and the PC via a HUB as in the following figure.

Hub

µR10000/µR20000 Recorder

10BASE-T

straight cable

10BASE-T

straight cable

When Connecting to a Preexisting Network

The following figure illustrates an example in which a recorder and a PC are connected

to the network. When connecting the recorder or the PC to a preexisting network, the

transfer rate, connector type, etc. must be matched. For details, consult your system or

network administrator.

Hub, router, etc.

Network

µR10000/µR20000 Recorder

10BASE-T

straight cable

Note

• Depending on the reliability of the network or the volume of network traffic, all the transferred

data may not be retrieved by the PC.

• Communication performance deteriorates if multiple PCs access the recorder

simultaneously.