User Manual

51
IM 04P01B01-02E
Setup Items and Default Values
Setup Items in Setting Mode and Their Default Values
(Recorder version: 1.31)
The items with an asterisk are not displayed in the default condition. To display these
items, settings must be changed in Basic Setting mode.
Setup Item Pen/Dot Selectable Range or Selections Default Value
Range > CH - 01 to 06 01
Range > Mode - Volt/TC/RTD/1-5V/Scale/Delta/DI/SQRT/Skip Volt
Range > Mode > Range - 20mV/60mV/200mV/2V/6V/20V/50V/1-5V/
R/S/B/K/E/J/T/N/W/L/U/WRe/Pt/JPt/Level/Cont/
(Selections for /N1 and /N3 options)
2V
*Bias > CH - 01 to 06 01
*Bias > Bias - On/Off Off
*Bias > Bias - ±10 % of the span of the measurable range or
the scaling span
-
Calibration (/CC1 option)
Calibration > CH - 01 to 06 01
Calibration > Calibration - On/Off Off
Calibration > datums - Within the range -
Calibration > revise - Within the range
(correction point + correction value for revise value)
-
Calibration > Decision - Yes/No Yes
Alarm > CH - 01 to 06 01
Alarm > Level - 1/2/3/4 1
Alarm > Alarm - On/Off Off
Alarm > Type - H/L/h/l/R/r (*/T/t) H
Alarm > Value - Depends on the alarm type. -
Alarm > Relay - On/Off Off
Alarm > Relay No. - I01 to I06 I01
Unit > CH - 01 to 06 01
Unit > Unit - 6 characters or less Blank
Chart Pen Model 82 types (pen model) 20 mm/h
Dot Model 1 to 1500 mm/h (dot model) 20 mm/h
Clock - Date/Time -
Aux > Trend Dot Model Auto/Fix Auto
Aux > Zone > CH - 01 to 06 01
Aux > Zone > Left, Right - Within the recording span range (mm) Left: 0, Right: 100
*Aux > Partial > CH - 01 to 06 01
*Aux > Partial > Partial - On/Off Off
*Aux > Partial > Expand - 1 to 99% 50
*Aux > Partial > Boundary - Within the recording span range -
Aux > Print out > CH - 01 to 06 01
Aux > Print out > Trend Dot Model On/Off On
Aux > Print out > Periodic - On/Off On
Aux > Tag > CH - 01 to 06 01
Aux > Tag > Tag - 7 characters or less 1 to 6
Aux > Message > Message No. - 1 to 5 1
Aux > Message > (Message) - 16 characters or less Blank
Aux > Chart2 Pen Model 82 types (pen model) 20 mm/h
Dot Model 1 to 1500 mm/h (dot model) 20 mm/h
*Aux > Moving_AVE > CH Dot Model 01 to 06 01
*Aux > Moving_AVE > No. of samples Dot Model Off, 2 to 16 Off
*Aux > Filter > CH Pen Model 01 to 06 01
*Aux > Filter > Resp. Time Pen Model 2s/5s/10s Off
*Aux > Alm delay T > CH - 01 to 06 01
*Aux > Alm delay T > Duration - 0 to 3600s 10s
Aux > Brightness > Display - 1/2/3/4/5/6/7/8 4
Aux > Brightness > Light - 1/2/3/4 2