User Manual
SM 04P01B01-01E7-2
7.2 Replacable Parts
The recommended replacement periods for wearable parts (ones with limited lifespans)
is given in the table below. The replacement periods are based on standard operating
conditions. The actual replacement period should be determined depending on the
actual operating conditions.
Pen Model
Note
33 days
2 km
B8800CA
X Motor Assembly
5 years
Item
Replacement
Period
Part Name
Part No.
Z-fold chart paper
Chart
B9565AW When used at 20 mm/h
Pen servo
Lever bearing
Plotter motor
Plotter carriage
Chart paper feed
motor
Display
Plotter pen
Felt pen Pen Assembly B9902AM
B9902AN
B9902AP
B9902AQ
Red
Green
Blue
Violet
At a pen speed of
10 cm/s
100,000
characters
Pen Assembly B9902AR When printing continuously
5 years* Display Assembly For pens 1 to 4
5 years Motor Assembly B9962EJ
5 years Carriage Assembly B8800DJ
For the X-axis
5 years B8800DT
Bearing B9900RP For the plotter
5 years Pen Servo
Assembly
B8800FG
Shared by all pens
(excludes the pen arm ASSY)
Quantity
Used
1
1 each
1
1
1
1
Internal light LED
2 years* LED Assembly B8800CR
1
1
1
1 to 4
* The half life of the brightness at the factory default brightness setting.
Dot Model
Note
33 days
3 months
B9962EJ
Carriage Assembly
5 years
Item
Replacement
Period
Part Name Part No.
Ribbon feed motor
Z-fold chart paper Chart B9565AW When used at 20 mm/h
Ribbon shift gear
Ribbon shift motor
Carriage
Carriage motor
Pulley
Chart paper feed
motor
Ribbon cassette
Ribbon Cassette
B9901AX
5 years* B8800CA
5 years
3 years
Pulley Assembly
B9963CJ
5 years Motor Assembly
B9963CF
5 years B9963CL
Motor Assembly
B9962EJ
5 years Swing Gear A
Swing Gear B
B8801BX
B8801BW
5 years MOTOR Assembly
B9962EJ
Display
Display Assembly
Motor Assembly
For the carriage
Ribbon feed gear
5 years Gear
B9901HL
B9901HM
B9901HN
Lever Assembly3 years B9901EK For the carriage
Lever
Quantity
Used
1
1
1
1
1
2
1
1
1
1 each
1
Internal light LED 2 years* LED Assembly
B8800CR
1
1 each
* The half life of the brightness at the factory default brightness setting.
For information on replacing the parts in the shaded area, see the
µ
R10000 Recorder
user’s manual
(IM 04P01B01-01E).