User Manual

1-1
IM WX1-08E
1
2
3
Index
Overview
Chapter 1 Overview
1.1 Overview of Gate µR Functions
Gate µR (hereinafter referred to as “this software” is a software driver that acquires data
from the Yokogawa µR10000/µR20000/SR10000 (Referred to hereinafter as the recorder
in this manual.) Recorder and transfers it to DAQLOGGER or Remote Monitor. Using
the software allows you to monitor pressure, temperature, and other kinds of data on
DAQLOGGER or Remote Monitor that was measured on the µR10000.
Yokogawa’s DAQLOGGER is a software program that allows users to open a connection
from their PC to various kinds of Yokogawa recorders (the µR10000/µR1800, VR,
DARWIN, DX, MV, and CX) and perform data logging and monitoring.
Yokogawa’s Remote Monitor is a software program that enables monitoring of data
logged by recorders or data logging software.
Features
• Runs as a Windows application.
• Of the instruments in the µR series, only the µR10000/µR20000/SR10000 can be
connected.
• Up to sixteen recorder’s can be connected for communication
.
• Measurement can be performed at intervals of up to 0.5 seconds
*
.
* However, DAQLOGGER’s shortest interval is 1 second. Also, the maximum speed of 0.5
seconds may not be attainable depending on the amount of data being read, the response
time of the device, and the communication speed.