Owner's manual

IM 12B06K07-E-E
4. Delivery
4.1 Delivery scope
The control unit is inspected in the factory and
delivered ready for installation in a packaging which
optimally protects the control.
The delivery consists of:
• control unit RF20C (EXmatic 460)
• key for control cabinet
• operating instructions
Depending on the version you have ordered, you
also receive:
• Multi hose (installed)
• mounting angle for multi hose (installed)
Keep the control unit in the packaging. There, it is
protected best until being assembled.
4.2 Delivery inspection
Before releasing the control unit for
assembly, you must ensure that:
• packaging and unit are in an impeccable
condition.
• the identification plate of the control unit
corresponds to the data in the order form.
Figure 5: Identification plate
The identification plate is affixed to the inside of the
cabinet door!
In case of questions, please contact Yokogawa.
CAUTION!
DANGER!
WARNING!
EXmatic 460
GF-2-1-03-EX
SN: FE0002
V: 24VDC P: 30W
Air: 4-6 bar T:50ºC
made in germany www.e-p-e.com
CAUTION!
DANGER!
WARNING!