User Manual
4-11
IM MX100-01E
Specification
3
2
1
4
5
Index
Power consumption: Approximately 3 W
External dimensions: Approximately 57 (W) × 131 (H) × 151 (D) mm (including the
terminal cover)
Weight: Approximately 0.5 kg
Terminal type: Clamp, detachable on each channel
Applicable wire size: 0.2 to 2.5 mm
2
(AWG24 to 12)
Effects of Operating Conditions
The specications below apply when the integration time is 16.67 ms or more.
Warm-up time: At least 30 minutes after power-up
Effects of ambient temperature:
The ef
fect received by changes in 10°C increments of the ambient
temperature is: ±(0.05% of rdg + 0.05% of range) or less
However, Cu10Ω: ±(0.2% of range + 1 digit)
Effects of power uctuation:
Meets the accuracy specications for AC power supply in the
range 90 to 132 V and 180 to 250 V
Effects of magnetic eld:
The uctuation in external magnetic elds for AC (50/60 Hz) 400
A/m is ±(0.1% of rdg + 10 digits) or less
Effects from the signal source resistance:
Effects on DC voltage and thermocouple
from a uctuation of 1 kΩ in the signal source resistance
DC voltage: 1 V range or less ±10µV or less
2 V range or higher ±0.15% of rdg or less
Thermocouple: ±10µV or less
However, ±150 µV or less for burnout setting.
RTD: Fluctuation due to 10 Ω change per cable (same
resistance for the three wires); 100 Ω system:
±0.1°C or less, systems other than 100 Ω: ±1.0
°C or less. Fluctuation due to a difference in the
resistance between lead wires of 40 mΩ (maximum
difference among three wires) is approximately 0.1°C
(for Pt100)
Effect of position: Horizontal with the feet at the bottom is the rule.
Effects of vibration: The uctuation that results by applying a sinusoidal vibration
along all three axis at a frequency between 10 to 60 Hz and an
acceleration of 0.2 m/s
2
is ±(0.1% of rdg + 1 digit) or less
External Dimensions
Unit: mm
150.857
131
If not specified, the tolerance is ±3%. However, in cases of less than 10 mm, the tolerance is ±0.3
mm.
4.4 4-CH, High-Speed Universal Input Module (MX110-UNV-H04) Specifications