Owner's manual

IM MX190-02E
8
Appendix
Locations of Program Examples
User's Manual
The program examples in the table below are located in the API for the MX100/DARWIN
user's manual (IM MX190-01E) included on the CD-ROM.
Program Examples for the API
Programming
Language
Description Reference
Visual C++ Retrieval of the Measured Data Page 2-10
Retrieval of Setup Data and Configuration Page 2-13
Visual C Retrieval of the Measured Data Page 3-7
Retrieval of Setup Data and Configuration Page 3-11
Visual Basic Retrieval of the Measured Data Page 4-7
Retrieval of Setup Data and Configuration Page 4-10
Program Examples for the Extended API
Programming
Language
Description Reference
Visual C++ Retrieval of the Measured Data Page 12-16
Retrieval of Setup Data and Configuration Page 12-18
Visual C Retrieval of the Measured Data Page 13-13
Retrieval of Setup Data and Configuration Page 13-15
Visual Basic Retrieval of the Measured Data Page 14-13
Retrieval of Setup Data and Configuration Page 14-15
Visual Basic .NET Retrieval of the Measured Data Page 15-13
Retrieval of Setup Data and Configuration Page 15-15
C# Retrieval of the Measured Data Page 16-13
Retrieval of Setup Data and Configuration Page 16-15
Web Page
The program examples can be found at the following URL.
http://www.yokogawa.com/ns/mx100/download/
Description Programming
Language
API Extended
API
Retrieving measured data and displaying waveforms. Visual C++ Y Y
Visual C Y Y
Visual Basic Y Y
Visual Basic
.NET
N Y
C# N Y
Y: Program example available.
N: Program example not available (not
supported).
Location of the FAQ (Frequently Asked Questions)
Freuquently asked questions and their answers are given at the following URL.
http://www.yokogawa.com/ns/support/faq/ns-faq-mx190_01.htm