Owner's manual

2-57
IM MX180-01E
Integration Monitor
3
2
1
4
5
App
Index
2.10 Digital Output Settings
Procedure
Setting the Digital Output of Alarms
Alarm reference channel
Select output or not output
Turn ON/OFF Alarm 1
Select the alarm
Turn ON/OFF Alarm 4
Turn ON/OFF Alarm 3
Turn ON/OFF Alarm 2
Select hold/non-hold
of output relay
Select energize/de-energize
of output relay
1.
Click Channel to show the Channel setup screen.
2.
Click the DO Channel tab.
3.
Select the Use check boxes for the DO channels you wish to output.
4.
Click the Alarm button under Action.
5.
Click the First or Last alarm reference channel box under Ref. Ch. and enter the
measurement or computation channel numbers to reference for the alarm output.
6.
Click the Level 1, Level 2, Level 3, or Level 4 button under Ref. Ch.
7.
Click the Energize box to select an output relay action of Energize or De-energize.
8.
Click the Hold box to select an output relay behavior of Hold or Non-hold.
Setting the Digital Output Other Than Alarms
Select output or not output If Action is set to Manual,
click the button from 1 to 4
Select the source action
Select hold/non-hold
of output relay
Select energize/de-energize
of output relay
4.
Click the option button under Action to select the action used as the digital output
source.
5.
If you set Action to Manual, click any of the Manual DO buttons 1 to 4.
6.
Click the Energize box to select an output relay action of Energize or De-energize.
7.
Click the Hold box to select an output relay behavior of Hold or Non-hold.