Owner's manual

2-43

IM MX180-01E

Integration Monitor

App

Index

2.6 Displaying the Monitor and Setting the Display

Procedure

Changing the Display Settings on the Display Setup Screen

Channel display color

Trip point

Display zone position

Maximum/Minimum value of the scale

Select the display format of the Y-axis

(normal/exponent)

Select the Y-axis type (linear/logarithmic)

Turn scale ON/OFF when displaying

multi-axes zone

Channel select button

Display ON/OFF

Switch the display group

Group name

Execute automatic channel assignment

Number of channels assigned automatically

Restore the default maximum and minimum

values of the entire scale

Turn ON/OFF the trip point display

Click here

Click Display to show the Display setup screen.

Change the display settings according to the explanation is the figure below.

Set the display for each display group. You can set up to ten display groups.

Initializing, Copying, and Pasting of Settings on the Display Setup Screen

On the Display Setup Screen, you can reset the settings to default or copy and pate the

settings of one or multiple waveforms to the settings of other waveforms. You can copy

and paste according to the procedure below.

Click the copy source waveform number (No. column), choose Copy from the Edit menu,

click the copy destination waveform number, and choose Paste from the Edit menu.

All ON or OFF

Select to copy

Do not copy

Restore the default setting

Assign channels automatically

Copy first item to rest of selection

Select all channels

Drag to select the range