Owner's manual

3-21
IM MX180-01E
Viewer
3
2
1
4
5
App
Index
Explanation
Statistical Computation over an Area
Specify using two cursors the interval over which computation is to be performed.
If the cursors are not displayed, all the data are used in the statistical computation.
The statistical parameters are the minimum value, the maximum value, the P-P value
(maximum – minimum), the average value, and the rms value.
Copying Data to the Clipboard
If you click the Copy button, the results of statistical computation over an area are copied
to the clipboard as text data. You can press Ctrl + C when the statistical computation
over and area window is active to copy the displayed results as text data to the clipboard.
Note
•
To redo the computation after changing the computation area, you must select the “statistics
calculated over an area display window” button (see “Procedure” in section 3.2) or the menu
command again.
•
The cursors used to specify the interval for statistical computation over an area and those
used to read values are the same.
•
The Statistics window and the Cursor Value window can be displayed simultaneously.
3.4 Statistical Computation over an Area of Measured/Computed Data