Owner manual

19-3
IM MX190-01E
DARWIN for Extended API - Visual C++
19
Control Functions
Function Command Class and Member Function
Switch operation mode DS CDAQDA100:: switchMode
Retrieve code type - CDAQDA100:: switchCode
Switch (binary/ASCII code)
Reconfigure RS CDAQDA100:: reconstruct
Initialize settings RC CDAQDA100:: initSetValue
Reset alarms AR CDAQDA100:: ackAlarm
Set the date/time SD CDAQDA100:: setDateTime
Calculation start/stop EX CDAQDA100:: switchCompute
Report start/stop DR CDAQDA100:: switchReport
Establish setup mode XE CDAQDA100:: establish
Generally, the status is updated at the end of the process.
Status is not updated when establishing the setup mode.
Setting (Operation Mode) Functions
Function Command Class and Member Function
Range SKIP (not used) SR CDAQDA100:: setRange
DC voltage input SR CDAQDA100:: setRange
Thermocouple input SR CDAQDA100:: setRange
RTD input SR CDAQDA100:: setRange
Contact input (DI) SR CDAQDA100:: setRange
DC Current SR CDAQDA100:: setRange
Strain SR CDAQDA100:: setRange
Pulse SR CDAQDA100:: setRange
Power monitor SR CDAQDA100:: setRange
Difference computation SR CDAQDA100:: setChDELTA
between channels
Remote RJC SR CDAQDA100:: setChRRJC
Scaling unit SN CDAQDA100:: setChUnit
Alarm SA CDAQDA100:: setChAlarm
Becomes the channel unit setting.
The status is updated after the setting is entered.
19.2 Correspondence between the Functions and Class/Member Functions - DARWIN -