Owner manual

18-1
IM MX190-01E
MX100 Constants and Types for Extended API - Visual Basic -
18
Chapter 18 MX100 Constants and Types for Extended API - Visual Basic -
18.1 Overview of the MX100 Constants
This Extended API provides the following types of constants.
The data types below are provided. In Visual C/Visual C++, the constants from
chapter 6 are inherited. Also, constants and range type constants have been added
for the Extended API. See section 18.2. The constants for Visual Basic and Visual
Basic.NET/C# are listed in section 18.2.
Type Description Page
Number of items Number of modules, etc. 6-3, 18-4
Maximum values Maximum length of the tag string, etc. 6-3, 18-4
Constants Data numbers for specifying the 6-4, 18-3, 18-5
instantaneous value, etc.
Boolean value Valid (ON) setting or Invalid (OFF) setting 6-4, 18-5
Data status values Status of the measured data 6-4, 18-5
Alarm types Upper-limit alarm, etc. 6-5, 18-6
Channel kinds Universal input, digital input, etc. 6-5, 18-6
Scale types No scaling or linear scale 6-6, 18-7
Module types 4-CH universal input, etc. 6-6, 18-7
Numbers of channels 4 or 10 6-7, 18-8
Interval types 10 ms to 60000 ms 6-7, 18-8
Filter coefficient Input filter coefficient 6-7, 18-8
RJC types Internal RJC or external RJC 6-7, 18-8
Burnout types Off/Up/Down 6-7, 18-9
Unit types MX100 6-8, 18-9
Terminal types Screw terminal or clamp terminal 6-8, 18-9
A/D integral time types Auto, 50 Hz or 60 Hz 6-8, 18-9
Temperature unit types Celsius or Fahrenheit 6-8, 18-9
CF write modes Data write mode to the CF card 6-8, 18-9
CF status types CF status 6-8, 18-10
Unit status values Unit status 6-8, 18-10
FIFO status values FIFO status 6-9, 18-10
Display format values Display format of the 7-segment LED 6-9, 18-10
Output types Output range type 6-9, 18-10
Selected values Output value selection 6-9, 18-11
Transmission statuses Transmission output status 6-9, 18-11
Initial balance results Result of execution of initial balancing 6-9, 18-11
Options Presence/absence of options 6-9, 18-11