Owner manual

16-10 IM MX190-01E
Status Data
Data Name Function
Unit status value DAQMX100. statusUnitMX100
Valid number of FIFOs DAQMX100. statusFIFONumMX100
Backup (presence or absence) DAQMX100. statusBackupMX100
FIFO FIFO status value DAQMX100. statusFIFOMX100
Interval type DAQMX100. statusFIFOIntervalMX100
CF CF status type DAQMX100. statusCFMX100
Size DAQMX100. statusCFSizeMX100
Remaining capacity DAQMX100. statusCFRemainMX100
Status return time No. of seconds DAQMX100. statusTimeMX100
Milliseconds DAQMX100. statusMilliSecMX100
Year DAQMX100. statusYearMX100
Month DAQMX100. statusMonthMX100
Day DAQMX100. statusDayMX100
Hour DAQMX100. statusHourMX100
Minute DAQMX100. statusMinuteMX100
Second DAQMX100. statusSecondMX100
Current Data
Data Name Function
DO data Valid/Invalid value DAQMX100. currentDOValidMX100
ON/OFF status DAQMX100. currentDOValueMX100
AO/PWM data Valid/Invalid value DAQMX100. currentAOPWMValidMX100
Output data value DAQMX100. currentAOPWMValueMX100
Output value DAQMX100. currentDoubleAOPWMValueMX100
Initial balance data Valid/Invalid value DAQMX100. currentBalanceValidMX100
Initial balance value DAQMX100. currentBalanceValueMX100
Initial balance result DAQMX100. currentBalanceResultMX100
Trans output data Transmission status DAQMX100. currentTransmitMX100
This is the status of each data retrieved with the data retrieval functions.
The initial balance result of the initial balance data is the result executed by the
setup function.
Actually output output statuses such as DO data and AO/PWM data can be
retrieved as current data. However, immediately after sending data, the specified
value is returned, and the actual output may occur at the next timing.
Held data are the values retrieved upon a status update. It is not data from the time
the retrieval function was called.
16.1 Functions and Their Functionalities - MX100/C# -