Owner manual

16-6 IM MX190-01E
Retrieval Functions
Function FIFO Function
Status Continue DAQMX100. updateStatusMX100
System configuration data Continue DAQMX100. updateSystemMX100
Setup data Continue DAQMX100. updateConfigMX100
Output data DO data Continue DAQMX100. updateDODataMX100
AO/PWM data Continue DAQMX100. updateAOPWMDataMX100
Trans output data
Channel information data Continue DAQMX100. updateInfoChMX100
Measured data FIFO value Continue DAQMX100. measDataChMX100
(Specify channel) Instantaneous Continue DAQMX100. measInstChMX100
value
Measured data FIFO value Continue DAQMX100. measDataFIFOMX100
(specify FIFO) Instantaneous Continue DAQMX100. measInstFIFOMX100
value
Initial balance data Continue DAQMX100. updateBalanceMX100
Output channel data Continue DAQMX100. updateOutputMX100
Data retrieval is performed collectively and internally by this API.
Depending on the acquisition, the status may also be updated.
Channel information data and setup data (including system configuration data, initial
balance data, and output channel data) are stored internally, but the user can
update stored data explicitly.
Setup Items
Function FIFO Function
Set setup data Receive collectively Continue DAQMX100. getItemAllMX100
Send collectively Stop DAQMX100. setItemAllMX100
Setup items Read Continue DAQMX100. readItemMX100
Write Continue DAQMX100. writeItemMX100
Initialize Continue DAQMX100. initItemMX100
Loading, writing, and initializing of setting items is performed through access to the
field where the item is stored, and validity checks are not performed on those fields.
Also, status is not updated (no communication).
16.1 Functions and Their Functionalities - MX100/C# -