Owner manual

16-2 IM MX190-01E
Control Functions
Function FIFO Function
Set date/time Current time Stop DAQMX100. setDateTimeNowMX100
Set backup valid/invalid Continue DAQMX100. switchBackupMX100
Format of the CF card Stop DAQMX100. formatCFMX100
Unit Reconfigure Stop DAQMX100. reconstructMX100
Initialize Stop DAQMX100. initSetValueMX100
Reset alarm Stop DAQMX100. ackAlarmMX100
(alarm ACK)
7-segment LED display Continue DAQMX100. displaySegmentMX100
Initialize stored data Specify channel Continue DAQMX100. initDataChMX100
Specify FIFO Continue DAQMX100. initDataFIFOMX100
At the end of communications, the control function updates the status.
See the data manipulation functions for more about the data transmission and setup
functions.
Setup Functions
Function FIFO Function
Set setup data All setup data Stop DAQMX100. sendConfigMX100
(send collectively) Basic setup data Stop DAQMX100. sendConfigMX100
Set setup data Sys configuration data Stop DAQMX100. sendConfigMX100
individually Channel setup data Stop DAQMX100. sendConfigMX100
Initial balance data Stop DAQMX100. sendConfigMX100
Output channel data Stop DAQMX100. sendConfigMX100
Initial balance data Execute Stop DAQMX100. initBalanceMX100
Reset Stop DAQMX100. clearBalanceMX100
The setup data setup functions send the stroed data.
When setting arbitrary initial balance data, see the initial balance data sending
function under data manipulation functions.
16.1 Functions and Their Functionalities - MX100/C# -