Owner manual

10-45
IM MX190-01E
Functions for the DARWIN - Visual C/Visual Basic -
10
talkDataByBinaryDARWIN
Syntax
int talkDataByBinaryDARWIN(DAQDARWIN daqdarwin, int
startChType, int startChNo, int endChType, int endChNo,
DarwinDateTime * pDarwinDateTime);
Declaration
Public Declare Function talkDataByBinaryDARWIN Lib
"DAQDARWIN"(ByVal daqdarwin As Long, ByVal startChType As
Long, ByVal startChNo As Long, ByVal endChType As Long, ByVal
endChNo As Long, ByRef pDarwinDateTime As DarwinDateTime) As
Long
Parameters
daqdarwin Specify the device descriptor.
startChType Specify the start channel type.
startChNo Specify the start channel number.
endChType Specify the end channel type.
endChNo Specify the end channel number.
pDarwinDateTime Specify the destination where the time information data is to
be returned.
Description
Executes the declaration for retrieving measured data in binary format from the start
channel (start channel type and start channel number) to the end channel (end
channel type and end channel number).
• Stores time information data of the measured data if the return destination is
specified.
• Specify measurement channels and computation channels separately.
• MSB is specified for the byte output order.
• This function executes the TS and FM commands of the DARWIN communication
function.
• After executing this function, use the getChDataByBinaryDARWIN function to
retrieve the data for each channel.
Return value
Returns an error number.
Error:
Not descriptor No device descriptor.
Reference
CDAQDARWIN::talkDataByBinary
CDAQDARWINDateTime::getDarwinDateTime
10.1 Details of Functions - DARWIN (Visual C/Visual Basic) -