Owner manual

10-44 IM MX190-01E
talkDataByASCIIDARWIN
Syntax
int talkDataByASCIIDARWIN(DAQDARWIN daqdarwin, int
startChType, int startChNo, int endChType, int endChNo,
DarwinDateTime * pDarwinDateTime);
Declaration
Public Declare Function talkDataByASCIIDARWIN Lib
"DAQDARWIN"(ByVal daqdarwin As Long, ByVal startChType As
Long, ByVal startChNo As Long, ByVal endChType As Long, ByVal
endChNo As Long, ByRef pDarwinDateTime As DarwinDateTime) As
Long
Parameters
daqdarwin Specify the device descriptor.
startChType Specify the start channel type.
startChNo Specify the start channel number.
endChType Specify the end channel type.
endChNo Specify the end channel number.
pDarwinDateTime Specify the destination where the time information data is
to be returned.
Description
Executes the declaration for retrieving measured data in ASCII format from the start
channel (start channel type and start channel number) to the end channel (end
channel type and end channel number).
• Stores time information of the measured data if the return destination is specified.
• Specify measurement channels and computation channels separately.
• This function executes the TS and FM commands of the DARWIN
communication function.
• After executing this function, use the getChDataByASCIIDARWIN function to
retrieve the data for each channel.
Return value
Returns an error number.
Error:
Not descriptor No device descriptor.
Reference
CDAQDARWIN::talkDataByASCII
CDAQDARWINDateTime::getDarwinDateTime
10.1 Details of Functions - DARWIN (Visual C/Visual Basic) -