Owner manual

7-61
IM MX190-01E
DARWIN - Visual C++ -
7
CDAQDARWINDateTime Class
CDAQDateTime
CDAQDARWINDateTime
This class is derived from the CDAQDateTime class.
Class for storing time information data of the DARWIN series.
It is a wrapper class of the DarwinDateTime structure.
Stores the time information data that is retrieved when the measured data through
the talker function is retrieved.
When storing the measured data through the talker function, the following member
functions corresponding to the code are used.
Code Member Functions
ASCII code setLine
Binary code setByte
In the case of ASCII codes, member functions are provided that analyze and store
the output format strings below.
DATEYYMMDD
TIMEhhmmss
In the case of binary codes, member functions are provided that analyze and store 6
bytes or 8 bytes (loading instantaneous value data) of data.
Public Members
Construct/Destruct
CDAQDARWINDateTime Constructs an object.
~CDAQDARWINDateTime Destructs an object.
Structure Manipulation
getDarwinDateTime Gets the data in a structure.
setDarwinDateTime Sets the data in a structure.
initDarwinDateTime Initializes the data in a structure.
Member Data Manipulation
getYear Gets the year.
getMonth Gets the month.
getDay Gets the day.
getHour Gets the hours.
getMinute Gets the minutes.
getSecond Gets the seconds.
getFullYear Gets the 4-digit year.
7.4 Details of the DARWIN Class